optimizecode

GPIO/ClientDoor.json

@@ -1,9 +1 @@
-{
+{"servers": {"name": "MQTT local","host": "tcp://192.168.0.89:1883","user": "beetai","pass": "Admin@123"},"clients": {"name": "Door 1","topic": "device/gpio/1","active": 1}}
-  "servers": {
-    "name": "MQTT local",
-    "host": "tcp://192.168.10.200:1883",
-    "user": "beetai",
-    "pass": "Admin@123"
-  },
-  "clients": { "name": "Door 1", "topic": "device/gpio/1", "active": 1 }
-}

GPIO/GPIO.go

@@ -38,12 +38,6 @@ var CMS_PASS_BI = ""
 var CMS_TOPIC_IN = ""
 var CMS_TOPIC_OUT = ""
 
-// Counter number reconnect publish
-var number_repub = 0
-
-// Counter number reconnect subcriber
-var number_resub = 0
-
 // const CMS_HOST_BI  = "tcp://broker.beetai.com:21883"
 
 // const CMS_ACCESS_TOKEN_BI  = "beeetai"
@@ -57,18 +51,12 @@ var number_resub = 0
 
 // var CMS_TOPIC_IN  = "gpio/devices/beetin/in/+"
 // var CMS_TOPIC_OUT  = "gpio/devices/beetin/out/+"
-
 var time_now int = 0
 var Name string = ""
 var door_state bool
-
-// Check mqtt connect
-var stt_mqtt = false
-var num_reconnect_pub = 0
-var num_reconnect_sub = 0
 var (
 	// Use mcu pin 10, corresponds to physical pin 19 on the pi
-	relay = rpio.Pin(6) // (10.200)GPIO 6- raspberry pi 3  === GPIO 9 - raspberry 3B+ (10.201)
+	relay = rpio.Pin(6) // 6- raspberry pi 1 / 9 - raspberry 3B+
 )
 
 // {
@@ -150,9 +138,8 @@ func LoadConfig(path string) {
 }
 func main() {
 	// Bat debug
-	// mqtt.DEBUG = log.New(os.Stderr, "DEBUG ", log.Ltime)
+	//mqtt.DEBUG = log.New(os.Stderr, "DEBUG ", log.Ltime)
-	fmt.Println("======== START MAIN ==========")
+	time.Sleep(7 * time.Second)
-	time.Sleep(1 * time.Second)
 	if state_read_ecf == false {
 		LoadConfig(Path_config)
 		fmt.Println("Read config done")
@@ -167,9 +154,9 @@ func main() {
 
 	}
 	fmt.Println(door)
-
+	mqtt_begin()
 	//SetConnectionLostHandler(connLostHandler)
-	// mqtt_cms_bi.Subscribe(CMS_TOPIC_IN, 0, mqtt_messageHandler)
+	//mqtt_cms_bi.Subscribe(CMS_TOPIC_IN, 0, mqtt_messageHandler)
 
 	// Open and map memory to access gpio, check for errors
 	if err := rpio.Open(); err != nil {
@@ -182,21 +169,21 @@ func main() {
 	defer rpio.Close()
 	// Set pin to output mode
 	relay.Output()
-	//relay.PullUp()
+	relay.PullUp()
-	relay.PullDown()
 	// Toggle pin 20 times
 	//go Check_door()
-	mqtt_begin()
 	for {
 		Check_door()
 	}
 }
-
+func connLostHandler(c mqtt.Client, err error) {
+	fmt.Printf("Connection lost, reason: %v\n", err)
+	mqtt_begin()
+}
 func Check_door() {
 	if door_state == true {
 		time.Sleep(time.Second * time_hold)
-		relay.Low() // 201
+		relay.Low()
-		//relay.High()
 		if Debug == 1 {
 			fmt.Println("Close Door")
 			fmt.Println("--------------------------------")
@@ -209,60 +196,64 @@ func mqtt_begin() {
 	fmt.Println(CMS_HOST_BI)
 	fmt.Println(CMS_ACCESS_TOKEN_BI)
 	fmt.Println(CMS_PASS_BI)
+	
 	opts_cms_bi := mqtt.NewClientOptions()
 	opts_cms_bi.AddBroker(CMS_HOST_BI)
 	opts_cms_bi.SetUsername(CMS_ACCESS_TOKEN_BI)
 	opts_cms_bi.SetPassword(CMS_PASS_BI)
 	opts_cms_bi.SetCleanSession(true)
-	opts_cms_bi.SetConnectionLostHandler(MQTTLostConnectHandler)
+	opts_cms_bi.OnConnect = func(c mqtt.Client) {
-	opts_cms_bi.SetOnConnectHandler(MQTTOnConnectHandler)
+		fmt.Printf("Client connected, subscribing to: " + CMS_TOPIC_IN)
+		c.Subscribe(CMS_TOPIC_IN, 0, mqtt_messageHandler)
+	}
+
+	opts_cms_bi.OnConnectionLost = (c mqtt.Client, err error) {
+		fmt.Println("MQTT Lost Connect\n")
+		fmt.Println(err)
+	}
 
 	mqtt_cms_bi = mqtt.NewClient(opts_cms_bi)
-	if token_1 := mqtt_cms_bi.Connect(); token_1.Wait() && token_1.Error() == nil {
+	// opts_cms_bi.SetConnectionLostHandler(MQTTLostConnectHandler)
-		//file.Write_log("MQTT CMS Beetsoft Connected\n", path_log)
+	// opts_cms_bi.SetOnConnectHandler(MQTTOnConnectHandler)
-		if Debug == 1 {
+
-			fmt.Printf("MQTT Server Connected\n")
+	var reconect = false
+	for reconect == false {
+		if token_1 := mqtt_cms_bi.Connect(); token_1.Wait() && token_1.Error() == nil {
+			//file.Write_log("MQTT CMS Beetsoft Connected\n", path_log)
+			if Debug == 1 {
+				fmt.Printf("MQTT CMS Beetsoft Connected\n")
+			}
+			reconect = true
 		}
-	} else {
+		// else {
-		//file.Write_log("MQTT CMS Beetsoft cant not Connected\n", path_log)
+		// 	//file.Write_log("MQTT CMS Beetsoft cant not Connected\n", path_log)
-		if Debug == 1 {
+		// 	if Debug == 1 {
-			fmt.Printf("MQTT Server  cant not Connected\n")
+		// 		fmt.Printf("MQTT CMS Beetsoft cant not Connected\n")
-			fmt.Printf("Loi Server  : %v \n", token_1.Error())
+		// 		fmt.Printf("Loi CMS Beetsoft : %v \n", token_1.Error())
-			fmt.Printf("-------------------\n")
+		// 		fmt.Printf("-------------------\n")
-		}
+		// 	}
-	}
+		// 	reconect = false
-	if token := mqtt_cms_bi.Subscribe(CMS_TOPIC_IN, 0, mqtt_messageHandler); token.Wait() && token.Error() != nil {
+		// }
-		fmt.Println(token.Error())
-	} else {
-		fmt.Println("Subcriber is MQTTOnConnectHandler () OKIE ")
 	}
 
-	// opts_cms_bi.OnConnect = func(c mqtt.Client) {
+	
-	// 	fmt.Printf("Client connected, subscribing to: " + CMS_TOPIC_IN)
-	// 	c.Subscribe(CMS_TOPIC_IN, 0, mqtt_messageHandler)
-	// }
 
 }
 
-func MQTTLostConnectHandler(c mqtt.Client, err error) {
+// func MQTTLostConnectHandler(c mqtt.Client, err error) {
-	// file.Write_log("MQTT CMS Beetsoft Lost Connect\n", box.Path_log_luncher)
+// 	// file.Write_log("MQTT CMS Beetsoft Lost Connect\n", box.Path_log_luncher)
-	fmt.Println("MQTT SERVER Lost Connect\n")
+// 	fmt.Println("MQTT CMS Beetsoft Lost Connect\n")
-	fmt.Println(err)
+// 	fmt.Println(err)
-}
+// }
-func MQTTOnConnectHandler(client mqtt.Client) {
+// func MQTTOnConnectHandler(client mqtt.Client) {
-	// file.Write_log("Reconnect: MQTT_OnConnectHandler\n", box.Path_log_luncher)
+// 	// file.Write_log("Reconnect: MQTT_OnConnectHandler\n", box.Path_log_luncher)
-	fmt.Println("Reconnect: MQTT_OnConnectHandler\n")
+// 	fmt.Println("Reconnect: MQTT_OnConnectHandler\n")
-	//mqtt_cms_bi.Unsubscribe(CMS_TOPIC_IN)
+// 	mqtt_cms_bi.Unsubscribe(CMS_TOPIC_IN)
-	//time.Sleep(10)
+// 	time.Sleep(10)
-	//mqtt_cms_bi.Subscribe(CMS_TOPIC_IN, 0, mqtt_messageHandler)
+// 	mqtt_cms_bi.Subscribe(CMS_TOPIC_IN, 0, mqtt_messageHandler)
-	if token := client.Subscribe(CMS_TOPIC_IN, 0, mqtt_messageHandler); token.Wait() && token.Error() != nil {
+// 	fmt.Println("Recall function Subscribe MQTT\n")
-		fmt.Println(token.Error())
+// 	// file.Write_log("Recall function Subscribe MQTT\n", box.Path_log_luncher)
-	} else {
+// }
-		fmt.Println("Subcriber is MQTTOnConnectHandler () OKIE ")
-	}
-	//fmt.Println("Recall function Subscribe MQTT\n")
-	// file.Write_log("Recall function Subscribe MQTT\n", box.Path_log_luncher)
-}
 
 /************************************************************************/
 var k int
@@ -274,26 +265,6 @@ func mqtt_messageHandler(mqtt_bi mqtt.Client, message mqtt.Message) {
 		fmt.Printf("TOPIC: %s\n", message.Topic())
 		fmt.Printf("MSG:\n %s\n", message.Payload())
 	}
-	if string(message.Payload()) == `{"method":"gpio","params":"1"}` {
-		fmt.Println("MO KHOA")
-		if door_state == true {
-
-		} else {
-			relay.High() // 201
-			//relay.Low()
-			//Name = (list["name"]).(string)
-			fmt.Println("Xin Chao Mung " + Name)
-		}
-
-		//msg := `{"method":"gpio","params":"1"}`
-		//CmsResponse(mqtt_bi, topic, msg)
-		if Debug == 1 {
-			fmt.Println("Open Door")
-			fmt.Println("--------------------------------")
-		}
-
-		door_state = true
-	}
 	//file.Write_log(string(message.Topic()), path_log)
 	//file.Write_log(string(message.Payload()), path_log)
 	dec := json.NewDecoder(bytes.NewReader(message.Payload()))
@@ -317,8 +288,7 @@ func mqtt_messageHandler(mqtt_bi mqtt.Client, message mqtt.Message) {
 			if door_state == true {
 
 			} else {
-				relay.High() //201
+				relay.High()
-				//relay.Low()
 				Name = (list["name"]).(string)
 				fmt.Println("Xin Chao Mung " + Name)
 			}

GPIO/install_mqtt.sh

@@ -1,8 +0,0 @@
-#! /bin/bash
-sudo apt-get update
-sudo apt-get install mosquitto
-echo "user: beetai ; Nhap pass: Admin@123"
-sudo mosquitto_passwd -c /etc/mosquitto/passwd beetai
-echo "allow_anonymous false \n password_file /etc/mosquitto/passwd" >> /etc/mosquitto/conf.d/default.conf
-sudo systemctl restart mosquitto
-exit 0