add light sensor p2

Lock/Lock.ino

@@ -67,10 +67,19 @@
 #define relay_2 6 //6     // Set Relay 1 Pin
 #define button_2 8 // button exit 
 
-#define wipeB A0     // Button pin for WipeMode
+
 
 #define Light A1 // Led tro sang camera
+//------------------------
+#define ss A0
+int stt_ss;
+int stt_old_ss;
+String input_ss;
 
+int th = 1023; // ngưỡng
+int time_get = 250;
+
+//------------------------
 
 int stt;
 int stt_old;
@@ -97,7 +106,7 @@ void setup()
   digitalWrite(13, LOW);
 
   pinMode(ledView, OUTPUT);
-  pinMode(wipeB, INPUT_PULLUP); // Enable pin's pull up resistor
+  pinMode(ss, INPUT);
   pinMode(relay, OUTPUT);
   pinMode(relay_2, OUTPUT);
   pinMode(button, INPUT);
@@ -113,6 +122,7 @@ void setup()
 ///////////////////////////////////////// Main Loop ///////////////////////////////////
 void loop()
 {
+  ReadLightSS();
   ReadButton();
   SerialRead();
   CheckButton();
@@ -180,6 +190,45 @@ void ReadButton()
   stt_old = stt;
   stt_old_2 = stt_2;
 }
+//Read Light Sensor
+bool stt_msg = false;
+void ReadLightSS()
+{
+  //  stt_ss = digitalRead(ss);
+  int val = analogRead(A0);
+  if (val > th) {
+    delay (time_get);
+    int val = analogRead(A0);
+    if (val > th) {
+      stt_ss = 1;
+    } else {
+      stt_ss = 0;
+    }
+  } else {
+    stt_ss = 0;
+  }
+  //
+  if (stt_ss == 1 && stt_old_ss == 0)
+  {
+    stt_msg = true; // bật cờ gửi tín hiệu cho engine bật ads
+    
+    Light_stt = !Light_stt;
+    if (Light_stt == 1) {
+      TurnOn_Light();
+      //        Serial.println("Light sensor press ON");
+    }
+    else {
+      TurnOff_Light();
+      //        Serial.println("Light sensor press OFF");
+    }
+
+  }
+  if (stt_msg == true){
+     Serial.println("open_bf");
+     ClearSerialdata()
+  }
+  stt_old_ss = stt_ss;
+}
 
 
 
@@ -229,8 +278,11 @@ void SerialRead()
       }
       Serial.println("open_2");
       ClearSerialdata();
-    }
-    else
+    } else if (input == "recv_bf")
+    {
+      stt_msg = false;
+      ClearSerialdata();
+    } else
     {
       digitalWrite(13, LOW);
     }