diff --git a/monitor/log/log_engine/log.txt b/monitor/log/log_engine/log.txt
new file mode 100644
index 0000000..fbf828d
--- /dev/null
+++ b/monitor/log/log_engine/log.txt
@@ -0,0 +1 @@
+log
\ No newline at end of file
diff --git a/monitor/log/log_launcher/log.txt b/monitor/log/log_launcher/log.txt
new file mode 100644
index 0000000..fbf828d
--- /dev/null
+++ b/monitor/log/log_launcher/log.txt
@@ -0,0 +1 @@
+log
\ No newline at end of file
diff --git a/monitor/setup/configcam.json b/monitor/setup/configcam.json
new file mode 100644
index 0000000..ee5b976
--- /dev/null
+++ b/monitor/setup/configcam.json
@@ -0,0 +1,6 @@
+{
+    "camera": {
+      "translate_x": 0,
+      "traslate_y": 0
+    }
+}
\ No newline at end of file
diff --git a/monitor/setup/serverlite.sh b/monitor/setup/serverlite.sh
new file mode 100644
index 0000000..0cb9e68
--- /dev/null
+++ b/monitor/setup/serverlite.sh
@@ -0,0 +1,121 @@
+#!/bin/bash
+#*************cap quyen****************************
+echo "cap quyen"
+chown root:root /etc/sudoers
+sudo chmod +x /root/monitor/cache/clearcache.sh
+sudo chmod +x /root/monitor/cache/restart_service.sh
+sudo chmod +x /root/monitor/check/Check_engine
+sudo chmod +x /root/monitor/launcher/S905X_BI
+sudo chmod +x /root/monitor/setup/install_S905X_BI.sh
+sudo chmod +x /root/monitor/setup/capture.sh
+sudo chmod +x /root/monitor/setup/key.sh
+sudo chmod +x /root/monitor/setup/serverlite.sh
+sudo chmod +x /root/monitor/setup/datetime
+sudo chmod +x /root/monitor/setup/update_serverlite.sh
+echo "================================ install v4l ================================"
+sudo apt-get install -y v4l-utils
+#************install tmux***************
+echo "================================ install tmux ================================"
+sudo apt install -y tmux
+#*************install p7zip-full**************
+echo "================================ install p7zip ================================"
+sudo apt install -y p7zip-full
+#
+#****************rc.local*************
+echo "================================ setup rc.local ================================"
+echo '#!/bin/sh -e
+#
+# rc.local
+#
+# This script is executed at the end of each multiuser runlevel.
+# Make sure that the script will "" on success or any other
+# value on error.
+#
+# In order to enable or disable this script just change the execution
+# bits.
+#
+# By default this script does nothing.
+
+
+#/boot/fan.sh &
+
+if [ ! -d /var/run/sshd ]; then
+    mkdir /var/run/sshd
+    chmod 0755 /var/run/sshd
+    systemctl restart ssh
+fi
+
+echo "Begin rc.local. Time restart: $time_begin" >> /root/monitor/log/rc_local.log
+
+echo "nameserver 8.8.8.8" > /etc/resolv.conf
+
+tmux new -d -s server_js 'node /root/BiFace_Server_Config_API/server.js'
+
+exit 0' > /etc/rc.local
+#
+echo "================================ update serverlite ==============================="
+sudo apt -y update
+sudo apt-get install -y apache2
+cd /var/www
+sudo chmod -R 0777 html
+cd html
+if [ "$s1"= pro ]
+then git clone -b dev http://gitea.beetai.com/dongpd/BiFace_Server_Lite
+else git clone -b cloud http://gitea.beetai.com/dongpd/BiFace_Server_Lite
+fi
+sudo chmod -R 0777 BiFace_Server_Lite
+sudo apt-get install -y libapache2-mod-php php php-common php-curl php-dev php-gd php-pear php-imagick php-mysql php-xsl php-sqlite3 php-zip
+echo "
+<VirtualHost *:80>
+        # The ServerName directive sets the request scheme, hostname and port that
+        # the server uses to identify itself. This is used when creating
+        # redirection URLs. In the context of virtual hosts, the ServerName
+        # specifies what hostname must appear in the request's Host: header to
+        # match this virtual host. For the default virtual host (this file) this
+        # value is not decisive as it is used as a last resort host regardless.
+        # However, you must set it for any further virtual host explicitly.
+        #ServerName www.example.com
+
+        ServerAdmin webmaster@localhost
+        #DocumentRoot /var/www/html
+        DocumentRoot /var/www/html/BiFace_Server_Lite/web
+        <Directory /var/www/html/BiFace_Server_Lite/web>
+        Options Indexes FollowSymLinks
+        AllowOverride All
+        Require all granted
+        </Directory>
+        # Available loglevels: trace8, ..., trace1, debug, info, notice, warn,
+        # error, crit, alert, emerg.
+        # It is also possible to configure the loglevel for particular
+        # modules, e.g.
+        #LogLevel info ssl:warn
+
+        ErrorLog ${APACHE_LOG_DIR}/error.log
+        CustomLog ${APACHE_LOG_DIR}/access.log combined
+
+        # For most configuration files from conf-available/, which are
+        # enabled or disabled at a global level, it is possible to
+        # include a line for only one particular virtual host. For example the
+        # following line enables the CGI configuration for this host only
+        # after it has been globally disabled with "a2disconf".
+        #Include conf-available/serve-cgi-bin.conf
+</VirtualHost>
+
+# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
+" > /etc/apache2/sites-available/000-default.conf
+sudo a2enmod rewrite
+sudo service apache2 restart
+sudo echo "* * * * * php /var/www/html/BiFace_Server_Lite/yii sync" >> /var/spool/cron/crontabs/root
+#
+cd /root
+git clone http://gitea.beetai.com/dongpd/BiFace_Server_Config_API.git
+sudo apt-get install -y nodejs npm
+sudo apt-get install -y nodejs-dev node-gyp libssl1.0-dev
+sudo apt install -y npm
+cd BiFace_Server_Config_API
+npm install
+sudo bash /etc/rc.local
+cd /var/www/html/BiFace_Server_Lite
+sudo chmod 0777 db/app.db
+echo "================================ setup serverlite done! ================================"
+exit 0
diff --git a/monitor/setup/update_serverlite.sh b/monitor/setup/update_serverlite.sh
new file mode 100644
index 0000000..cbb4d82
--- /dev/null
+++ b/monitor/setup/update_serverlite.sh
@@ -0,0 +1,33 @@
+#!/bin/bash
+#*************cap quyen****************************
+echo "cap quyen"
+chown root:root /etc/sudoers
+sudo chmod +x /root/monitor/cache/clearcache.sh
+sudo chmod +x /root/monitor/cache/restart_service.sh
+sudo chmod +x /root/monitor/check/Check_engine
+sudo chmod +x /root/monitor/launcher/S905X_BI
+sudo chmod +x /root/monitor/setup/install_S905X_BI.sh
+sudo chmod +x /root/monitor/setup/capture.sh
+sudo chmod +x /root/monitor/setup/key.sh
+sudo chmod +x /root/monitor/setup/serverlite.sh
+sudo chmod +x /root/monitor/setup/datetime
+sudo chmod +x /root/monitor/setup/update_serverlite.sh
+echo "================================ update serverlite ==============================="
+cd /var/www
+sudo chmod -R 0777 html
+cd html
+sudo rm -rf BiFace_Server_Lite
+if [ "$s1"= pro ]
+then git clone -b dev http://gitea.beetai.com/dongpd/BiFace_Server_Lite
+else git clone -b cloud http://gitea.beetai.com/dongpd/BiFace_Server_Lite
+fi
+sudo chmod -R 0777 BiFace_Server_Lite
+cd /root
+sudo rm -rf BiFace_Server_Config_API
+git clone http://gitea.beetai.com/dongpd/BiFace_Server_Config_API.git
+cd BiFace_Server_Config_API
+#npm install
+cd /var/www/html/BiFace_Server_Lite
+sudo chmod 0777 db/app.db
+echo "================================ update serverlite done!!! ==============================="
+reboot