add reboot after install node

monitor/serverlite.sh

@@ -0,0 +1,160 @@
+#!/bin/bash
+#*************cap quyen****************************
+echo "cap quyen"
+chown root:root /etc/sudoers
+sudo chmod +x /root/monitor/cache/clearcache.sh
+sudo chmod +x /root/monitor/cache/restart_service.sh
+sudo chmod +x /root/monitor/check/Check_engine
+sudo chmod +x /root/monitor/launcher/S905X_BI
+sudo chmod +x /root/monitor/setup/install_S905X_BI.sh
+sudo chmod +x /root/monitor/setup/capture.sh
+sudo chmod +x /root/monitor/setup/key.sh
+sudo chmod +x /root/monitor/setup/serverlite.sh
+sudo chmod +x /root/monitor/setup/datetime
+sudo chmod +x /root/monitor/setup/update_serverlite.sh
+echo "================================ install v4l ================================"
+sudo apt-get install -y v4l-utils
+#************install tmux***************
+echo "================================ install tmux ================================"
+sudo apt install -y tmux
+#*************install p7zip-full**************
+echo "================================ install p7zip ================================"
+sudo apt install -y p7zip-full
+#
+#****************rc.local*************
+echo "================================ setup rc.local ================================"
+echo '#!/bin/sh -e
+#
+# rc.local
+#
+# This script is executed at the end of each multiuser runlevel.
+# Make sure that the script will "" on success or any other
+# value on error.
+#
+# In order to enable or disable this script just change the execution
+# bits.
+#
+# By default this script does nothing.
+
+
+#/boot/fan.sh &
+
+if [ ! -d /var/run/sshd ]; then
+    mkdir /var/run/sshd
+    chmod 0755 /var/run/sshd
+    systemctl restart ssh
+fi
+time_begin=$(date)
+echo "Begin rc.local. Time restart: $time_begin" >> /root/monitor/log/rc_local.log
+echo "nameserver 8.8.8.8" > /etc/resolv.conf
+exit 0' > /etc/rc.local
+#
+echo "================================ update serverlite ==============================="
+sudo apt -y update
+sudo apt-get install -y apache2
+cd /var/www
+sudo chmod -R 0777 html
+cd html
+if [ "$1" = pro ]
+then git clone -b litepro_dev http://gitea.beetai.com/dongpd/BiFace_Server_Lite
+else git clone -b cloud http://gitea.beetai.com/dongpd/BiFace_Server_Lite
+fi
+sudo chmod -R 0777 BiFace_Server_Lite
+sudo apt-get install -y libapache2-mod-php php php-common php-curl php-dev php-gd php-pear php-imagick php-mysql php-xsl php-sqlite3 php-zip
+echo "
+<VirtualHost *:80>
+        # The ServerName directive sets the request scheme, hostname and port that
+        # the server uses to identify itself. This is used when creating
+        # redirection URLs. In the context of virtual hosts, the ServerName
+        # specifies what hostname must appear in the request's Host: header to
+        # match this virtual host. For the default virtual host (this file) this
+        # value is not decisive as it is used as a last resort host regardless.
+        # However, you must set it for any further virtual host explicitly.
+        #ServerName www.example.com
+
+        ServerAdmin webmaster@localhost
+        #DocumentRoot /var/www/html
+        DocumentRoot /var/www/html/BiFace_Server_Lite/web
+        <Directory /var/www/html/BiFace_Server_Lite/web>
+        Options Indexes FollowSymLinks
+        AllowOverride All
+        Require all granted
+        </Directory>
+        # Available loglevels: trace8, ..., trace1, debug, info, notice, warn,
+        # error, crit, alert, emerg.
+        # It is also possible to configure the loglevel for particular
+        # modules, e.g.
+        #LogLevel info ssl:warn
+
+        ErrorLog ${APACHE_LOG_DIR}/error.log
+        CustomLog ${APACHE_LOG_DIR}/access.log combined
+
+        # For most configuration files from conf-available/, which are
+        # enabled or disabled at a global level, it is possible to
+        # include a line for only one particular virtual host. For example the
+        # following line enables the CGI configuration for this host only
+        # after it has been globally disabled with "a2disconf".
+        #Include conf-available/serve-cgi-bin.conf
+</VirtualHost>
+
+# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
+" > /etc/apache2/sites-available/000-default.conf
+sudo a2enmod rewrite
+sudo service apache2 restart
+# sudo echo "* * * * * php /var/www/html/BiFace_Server_Lite/yii sync" >> /var/spool/cron/crontabs/root
+#
+cd /root
+git clone http://gitea.beetai.com/dongpd/BiFace_Server_Config_API.git
+
+
+#sudo apt-get install -y nodejs npm
+#sudo apt-get install -y nodejs-dev node-gyp libssl1.0-dev
+#sudo apt install -y npm
+
+curl -o- https://raw.githubusercontent.com/nvm-sh/nvm/v0.39.2/install.sh | bash
+chmod +x ~/.nvm/nvm.sh
+. ~/.bashrc
+
+nvm install 16
+
+npm install pm2@5.4.2 -g n
+#sudo n stable
+pm2 install pm2-logrotate
+
+cd BiFace_Server_Config_API
+npm install
+
+cd /root/monitor/setup/
+pm2 ecosystem
+echo "
+module.exports = {
+  apps : [
+        {
+        name: 'Server_lite',
+        cwd: '/root/BiFace_Server_Config_API',
+        script: 'server.js',
+        args: '',
+        interpreter: 'node',
+        restart_delay: 1000,
+        cron_restart:  '0 0 * * *',
+        watch: false,
+        time: true
+    }
+]
+};
+" > ecosystem.config.js
+pm2 reload ecosystem.config.js
+
+pm2 startup
+pm2 save
+
+#cd BiFace_Server_Config_API
+#npm install
+sudo bash /etc/rc.local
+
+cd /var/www/html/BiFace_Server_Lite
+sudo chmod 0777 db/app.db
+echo "================================ setup serverlite done! ================================"
+
+reboot
+exit 0

monitor/setup/serverlite.sh

@@ -113,7 +113,7 @@ git clone http://gitea.beetai.com/dongpd/BiFace_Server_Config_API.git
 
 curl -o- https://raw.githubusercontent.com/nvm-sh/nvm/v0.39.2/install.sh | bash
 chmod +x ~/.nvm/nvm.sh
-source ~/.bashrc
+. ~/.bashrc
 
 nvm install 16
 
@@ -155,4 +155,6 @@ sudo bash /etc/rc.local
 cd /var/www/html/BiFace_Server_Lite
 sudo chmod 0777 db/app.db
 echo "================================ setup serverlite done! ================================"
+
+reboot
 exit 0