#!/bin/bash
#*************cap quyen****************************
echo "cap quyen"
chown root:root /etc/sudoers
sudo chmod +x /root/monitor/cache/clearcache.sh
sudo chmod +x /root/monitor/cache/restart_service.sh
sudo chmod +x /root/monitor/check/Check_engine
sudo chmod +x /root/monitor/launcher/S905X_BI
sudo chmod +x /root/monitor/setup/install_S905X_BI.sh
sudo chmod +x /root/monitor/setup/capture.sh
sudo chmod +x /root/monitor/setup/key.sh
sudo chmod +x /root/monitor/setup/serverlite.sh
sudo chmod +x /root/monitor/setup/datetime
sudo chmod +x /root/monitor/setup/update_serverlite.sh
echo "================================ install v4l ================================"
sudo apt-get install -y v4l-utils
#************install tmux***************
echo "================================ install tmux ================================"
sudo apt install -y tmux
#*************install p7zip-full**************
echo "================================ install p7zip ================================"
sudo apt install -y p7zip-full
#
#****************rc.local*************
echo "================================ setup rc.local ================================"
echo '#!/bin/sh -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "" on success or any other
# value on error.
#
# In order to enable or disable this script just change the execution
# bits.
#
# By default this script does nothing.


#/boot/fan.sh &

if [ ! -d /var/run/sshd ]; then
    mkdir /var/run/sshd
    chmod 0755 /var/run/sshd
    systemctl restart ssh
fi
time_begin=$(date)
echo "Begin rc.local. Time restart: $time_begin" >> /root/monitor/log/rc_local.log
echo "nameserver 8.8.8.8" > /etc/resolv.conf
exit 0' > /etc/rc.local
#
echo "================================ update serverlite ==============================="
sudo apt -y update
sudo apt-get install -y apache2
cd /var/www
sudo chmod -R 0777 html
cd html
if [ "$1" = pro ]
then git clone -b BiFacePro2.0.1 http://gitea.beetai.com/dongpd/BiFace_Server_Lite
else git clone -b cloud http://gitea.beetai.com/dongpd/BiFace_Server_Lite
fi
sudo chmod -R 0777 BiFace_Server_Lite
sudo apt-get install -y libapache2-mod-php php php-common php-curl php-dev php-gd php-pear php-imagick php-mysql php-xsl php-sqlite3 php-zip
echo "
<VirtualHost *:80>
        # The ServerName directive sets the request scheme, hostname and port that
        # the server uses to identify itself. This is used when creating
        # redirection URLs. In the context of virtual hosts, the ServerName
        # specifies what hostname must appear in the request's Host: header to
        # match this virtual host. For the default virtual host (this file) this
        # value is not decisive as it is used as a last resort host regardless.
        # However, you must set it for any further virtual host explicitly.
        #ServerName www.example.com

        ServerAdmin webmaster@localhost
        #DocumentRoot /var/www/html
        DocumentRoot /var/www/html/BiFace_Server_Lite/web
        <Directory /var/www/html/BiFace_Server_Lite/web>
        Options Indexes FollowSymLinks
        AllowOverride All
        Require all granted
        </Directory>
        # Available loglevels: trace8, ..., trace1, debug, info, notice, warn,
        # error, crit, alert, emerg.
        # It is also possible to configure the loglevel for particular
        # modules, e.g.
        #LogLevel info ssl:warn

        ErrorLog ${APACHE_LOG_DIR}/error.log
        CustomLog ${APACHE_LOG_DIR}/access.log combined

        # For most configuration files from conf-available/, which are
        # enabled or disabled at a global level, it is possible to
        # include a line for only one particular virtual host. For example the
        # following line enables the CGI configuration for this host only
        # after it has been globally disabled with "a2disconf".
        #Include conf-available/serve-cgi-bin.conf
</VirtualHost>

# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
" > /etc/apache2/sites-available/000-default.conf
sudo a2enmod rewrite
sudo service apache2 restart
# sudo echo "* * * * * php /var/www/html/BiFace_Server_Lite/yii sync" >> /var/spool/cron/crontabs/root
#
cd /root
git clone http://gitea.beetai.com/dongpd/BiFace_Server_Config_API.git
sudo apt-get install -y nodejs npm
sudo apt-get install -y nodejs-dev node-gyp libssl1.0-dev
sudo apt install -y npm
cd BiFace_Server_Config_API
npm install
sudo bash /etc/rc.local
cd /var/www/html/BiFace_Server_Lite
sudo chmod 0777 db/app.db
echo "================================ setup serverlite done! ================================"
exit 0