Clear
This commit is contained in:
parent
910f31c727
commit
65daad87ac
600
Lock/Lock.ino
600
Lock/Lock.ino
|
|
@ -38,34 +38,10 @@
|
||||||
#include <SPI.h> // RC522 Module uses SPI protocol
|
#include <SPI.h> // RC522 Module uses SPI protocol
|
||||||
#include <MFRC522.h> // Library for Mifare RC522 Devices
|
#include <MFRC522.h> // Library for Mifare RC522 Devices
|
||||||
#include <avr/wdt.h>
|
#include <avr/wdt.h>
|
||||||
/*
|
|
||||||
Instead of a Relay you may want to use a servo. Servos can lock and unlock door locks too
|
|
||||||
Relay will be used by default
|
|
||||||
*/
|
|
||||||
|
|
||||||
// #include <Servo.h>
|
|
||||||
|
|
||||||
//#define COMMON_ANODE
|
|
||||||
// Ver 1
|
|
||||||
//#ifdef COMMON_ANODE
|
|
||||||
//#define LED_ON LOW
|
|
||||||
//#define LED_OFF HIGH
|
|
||||||
//#else
|
|
||||||
//#define LED_ON HIGH
|
|
||||||
//#define LED_OFF LOW
|
|
||||||
//#endif
|
|
||||||
//
|
|
||||||
//#define Light 7
|
|
||||||
#define ledView 13
|
#define ledView 13
|
||||||
//
|
|
||||||
//#define redLed 3 // Set Led Pins
|
|
||||||
//#define greenLed 6
|
|
||||||
//#define blueLed 5
|
|
||||||
//
|
|
||||||
//#define relay A2 //8 // Set Relay Pin
|
|
||||||
//#define wipeB 2 // Button pin for WipeMode
|
|
||||||
//#define button 7 // button exit
|
|
||||||
// --------------------------------------------
|
|
||||||
//Ver 3
|
//Ver 3
|
||||||
// LED 12V - A1
|
// LED 12V - A1
|
||||||
//Relay 1 - D5
|
//Relay 1 - D5
|
||||||
|
|
@ -96,173 +72,44 @@
|
||||||
#define Light A1 // Led tro sang camera
|
#define Light A1 // Led tro sang camera
|
||||||
|
|
||||||
|
|
||||||
|
int stt;
|
||||||
|
int stt_old;
|
||||||
|
String input;
|
||||||
|
|
||||||
|
|
||||||
|
int stt_2;
|
||||||
|
int stt_old_2;
|
||||||
|
String input_2;
|
||||||
|
|
||||||
bool Light_stt = false;
|
bool Light_stt = false;
|
||||||
bool relay_stt = false;
|
bool relay_stt = false;
|
||||||
bool relay_stt_2 = false;
|
bool relay_stt_2 = false;
|
||||||
|
|
||||||
bool sttRun = false;
|
bool sttRun = false;
|
||||||
bool programMode = false; // initialize programming mode to false
|
|
||||||
|
|
||||||
uint8_t successRead; // Variable integer to keep if we have Successful Read from Reader
|
|
||||||
|
|
||||||
byte storedCard[4]; // Stores an ID read from EEPROM
|
|
||||||
byte readCard[4]; // Stores scanned ID read from RFID Module
|
|
||||||
byte masterCard[4]; // Stores master card's ID read from EEPROM
|
|
||||||
|
|
||||||
// Create MFRC522 instance.
|
|
||||||
#define SS_PIN 10
|
|
||||||
#define RST_PIN 9
|
|
||||||
MFRC522 mfrc522(SS_PIN, RST_PIN);
|
|
||||||
|
|
||||||
bool Debug = false;
|
bool Debug = false;
|
||||||
|
|
||||||
///////////////////////////////////////// Setup ///////////////////////////////////
|
///////////////////////////////////////// Setup ///////////////////////////////////
|
||||||
void setup()
|
void setup()
|
||||||
{
|
{
|
||||||
|
//Arduino Pin Configuration
|
||||||
pinMode(13, OUTPUT);
|
pinMode(13, OUTPUT);
|
||||||
pinMode(Light, OUTPUT);
|
pinMode(Light, OUTPUT);
|
||||||
digitalWrite(13, LOW);
|
digitalWrite(13, LOW);
|
||||||
//Arduino Pin Configuration
|
|
||||||
pinMode(ledView, OUTPUT);
|
pinMode(ledView, OUTPUT);
|
||||||
pinMode(redLed, OUTPUT);
|
|
||||||
pinMode(greenLed, OUTPUT);
|
|
||||||
pinMode(blueLed, OUTPUT);
|
|
||||||
pinMode(wipeB, INPUT_PULLUP); // Enable pin's pull up resistor
|
pinMode(wipeB, INPUT_PULLUP); // Enable pin's pull up resistor
|
||||||
pinMode(relay, OUTPUT);
|
pinMode(relay, OUTPUT);
|
||||||
pinMode(relay_2, OUTPUT);
|
pinMode(relay_2, OUTPUT);
|
||||||
pinMode(button,INPUT);
|
pinMode(button,INPUT);
|
||||||
pinMode(button_2,INPUT);
|
pinMode(button_2,INPUT);
|
||||||
//Be careful how relay circuit behave on while resetting or power-cycling your Arduino
|
|
||||||
digitalWrite(relay, HIGH); // Make sure door is locked
|
digitalWrite(relay, HIGH); // Make sure door is locked
|
||||||
digitalWrite(relay_2, HIGH); // Make sure door is locked
|
digitalWrite(relay_2, HIGH); // Make sure door is locked
|
||||||
// delay(2000);
|
|
||||||
// digitalWrite(relay, LOW);
|
|
||||||
// delay(2000);
|
|
||||||
// digitalWrite(relay_2, HIGH); // Make sure door is locked
|
|
||||||
// delay(2000);
|
|
||||||
// digitalWrite(redLed, LED_OFF); // Make sure led is off
|
|
||||||
// digitalWrite(greenLed, LED_OFF); // Make sure led is off
|
|
||||||
// digitalWrite(blueLed, LED_OFF); // Make sure led is off
|
|
||||||
digitalWrite(Light, LOW);
|
digitalWrite(Light, LOW);
|
||||||
|
|
||||||
//Protocol Configuration
|
//Protocol Configuration
|
||||||
Serial.begin(9600); // Initialize serial communications with PC
|
Serial.begin(9600); // Initialize serial communications with PC
|
||||||
|
|
||||||
//
|
|
||||||
// SPI.begin(); // MFRC522 Hardware uses SPI protocol
|
|
||||||
// mfrc522.PCD_Init(); // Initialize MFRC522 Hardware
|
|
||||||
// if (Debug == true)
|
|
||||||
// {
|
|
||||||
// //If you set Antenna Gain to Max it will increase reading distance
|
|
||||||
// mfrc522.PCD_SetAntennaGain(mfrc522.RxGain_max);
|
|
||||||
// Serial.println(F("Access Control Example v0.1")); // For debugging purposes
|
|
||||||
// }
|
|
||||||
//
|
|
||||||
// ShowReaderDetails(); // Show details of PCD - MFRC522 Card Reader details
|
|
||||||
//
|
|
||||||
// //Wipe Code - If the Button (wipeB) Pressed while setup run (powered on) it wipes EEPROM
|
|
||||||
// if (digitalRead(wipeB) == LOW)
|
|
||||||
// { // when button pressed pin should get low, button connected to ground
|
|
||||||
// digitalWrite(redLed, LED_ON); // Red Led stays on to inform user we are going to wipe
|
|
||||||
// if (Debug == 1)
|
|
||||||
// {
|
|
||||||
// Serial.println(F("Wipe Button Pressed"));
|
|
||||||
// Serial.println(F("You have 10 seconds to Cancel"));
|
|
||||||
// Serial.println(F("This will be remove all records and cannot be undone"));
|
|
||||||
// }
|
|
||||||
// bool buttonState = monitorWipeButton(10000); // Give user enough time to cancel operation
|
|
||||||
// if (buttonState == true && digitalRead(wipeB) == LOW)
|
|
||||||
// { // If button still be pressed, wipe EEPROM
|
|
||||||
// // Serial.println(F("Starting Wiping EEPROM"));
|
|
||||||
// for (uint16_t x = 0; x < EEPROM.length(); x = x + 1)
|
|
||||||
// { //Loop end of EEPROM address
|
|
||||||
// if (EEPROM.read(x) == 0)
|
|
||||||
// { //If EEPROM address 0
|
|
||||||
// // do nothing, already clear, go to the next address in order to save time and reduce writes to EEPROM
|
|
||||||
// }
|
|
||||||
// else
|
|
||||||
// {
|
|
||||||
// EEPROM.write(x, 0); // if not write 0 to clear, it takes 3.3mS
|
|
||||||
// }
|
|
||||||
// }
|
|
||||||
// // Serial.println(F("EEPROM Successfully Wiped"));
|
|
||||||
// digitalWrite(redLed, LED_OFF); // visualize a successful wipe
|
|
||||||
// delay(200);
|
|
||||||
// digitalWrite(redLed, LED_ON);
|
|
||||||
// delay(200);
|
|
||||||
// digitalWrite(redLed, LED_OFF);
|
|
||||||
// delay(200);
|
|
||||||
// digitalWrite(redLed, LED_ON);
|
|
||||||
// delay(200);
|
|
||||||
// digitalWrite(redLed, LED_OFF);
|
|
||||||
// }
|
|
||||||
// else
|
|
||||||
// {
|
|
||||||
// // Serial.println(F("Wiping Cancelled")); // Show some feedback that the wipe button did not pressed for 15 seconds
|
|
||||||
// digitalWrite(redLed, LED_OFF);
|
|
||||||
// }
|
|
||||||
// }
|
|
||||||
// // Check if master card defined, if not let user choose a master card
|
|
||||||
// // This also useful to just redefine the Master Card
|
|
||||||
// // You can keep other EEPROM records just write other than 143 to EEPROM address 1
|
|
||||||
// // EEPROM address 1 should hold magical number which is '143'
|
|
||||||
// if (EEPROM.read(1) != 143)
|
|
||||||
// {
|
|
||||||
// if (Debug == 1)
|
|
||||||
// {
|
|
||||||
// Serial.println(F("No Master Card Defined"));
|
|
||||||
// Serial.println(F("Scan A PICC to Define as Master Card"));
|
|
||||||
// }
|
|
||||||
//
|
|
||||||
// do
|
|
||||||
// {
|
|
||||||
// successRead = getID(); // sets successRead to 1 when we get read from reader otherwise 0
|
|
||||||
// digitalWrite(blueLed, LED_ON); // Visualize Master Card need to be defined
|
|
||||||
// delay(200);
|
|
||||||
// digitalWrite(blueLed, LED_OFF);
|
|
||||||
// delay(200);
|
|
||||||
// } while (!successRead); // Program will not go further while you not get a successful read
|
|
||||||
// for (uint8_t j = 0; j < 4; j++)
|
|
||||||
// { // Loop 4 times
|
|
||||||
// EEPROM.write(2 + j, readCard[j]); // Write scanned PICC's UID to EEPROM, start from address 3
|
|
||||||
// }
|
|
||||||
// EEPROM.write(1, 143); // Write to EEPROM we defined Master Card.
|
|
||||||
// if (Debug == 1)
|
|
||||||
// {
|
|
||||||
// Serial.println(F("Master Card Defined"));
|
|
||||||
// }
|
|
||||||
// }
|
|
||||||
// if (Debug == 1)
|
|
||||||
// {
|
|
||||||
// Serial.println(F("-------------------"));
|
|
||||||
// Serial.println(F("Master Card's UID"));
|
|
||||||
// }
|
|
||||||
//
|
|
||||||
// for (uint8_t i = 0; i < 4; i++)
|
|
||||||
// { // Read Master Card's UID from EEPROM
|
|
||||||
// masterCard[i] = EEPROM.read(2 + i); // Write it to masterCard
|
|
||||||
// if (Debug == 1)
|
|
||||||
// {
|
|
||||||
// Serial.print(masterCard[i], HEX);
|
|
||||||
// }
|
|
||||||
// }
|
|
||||||
// if (Debug == 1)
|
|
||||||
// {
|
|
||||||
// Serial.println("");
|
|
||||||
// Serial.println(F("-------------------"));
|
|
||||||
// Serial.println(F("Everything is ready"));
|
|
||||||
// Serial.println(F("Waiting PICCs to be scanned"));
|
|
||||||
// }
|
|
||||||
//
|
|
||||||
// cycleLeds(); // Everything ready lets give user some feedback by cycling leds
|
|
||||||
// // }
|
|
||||||
// // wdt_enable(WDTO_500MS);
|
|
||||||
|
|
||||||
}
|
}
|
||||||
//void SerialRead();
|
|
||||||
//void ReadButton();
|
|
||||||
///////////////////////////////////////// Main Loop ///////////////////////////////////
|
///////////////////////////////////////// Main Loop ///////////////////////////////////
|
||||||
void loop()
|
void loop()
|
||||||
{
|
{
|
||||||
|
|
@ -270,118 +117,6 @@ void loop()
|
||||||
SerialRead();
|
SerialRead();
|
||||||
CheckButton();
|
CheckButton();
|
||||||
}
|
}
|
||||||
// do
|
|
||||||
// {
|
|
||||||
// ReadButton();
|
|
||||||
// SerialRead();
|
|
||||||
//
|
|
||||||
// successRead = getID(); // sets successRead to 1 when we get read from reader otherwise 0
|
|
||||||
// // When device is in use if wipe button pressed for 10 seconds initialize Master Card wiping
|
|
||||||
// if (digitalRead(wipeB) == LOW)
|
|
||||||
// { // Check if button is pressed
|
|
||||||
// // Visualize normal operation is iterrupted by pressing wipe button Red is like more Warning to user
|
|
||||||
// digitalWrite(redLed, LED_ON); // Make sure led is off
|
|
||||||
// digitalWrite(greenLed, LED_OFF); // Make sure led is off
|
|
||||||
// digitalWrite(blueLed, LED_OFF); // Make sure led is off
|
|
||||||
// // Give some feedback
|
|
||||||
// if (Debug == 1)
|
|
||||||
// {
|
|
||||||
// Serial.println(F("Wipe Button Pressed"));
|
|
||||||
// Serial.println(F("Master Card will be Erased! in 10 seconds"));
|
|
||||||
// }
|
|
||||||
//
|
|
||||||
// bool buttonState = monitorWipeButton(10000); // Give user enough time to cancel operation
|
|
||||||
// if (buttonState == true && digitalRead(wipeB) == LOW)
|
|
||||||
// { // If button still be pressed, wipe EEPROM
|
|
||||||
// EEPROM.write(1, 0); // Reset Magic Number.
|
|
||||||
// if (Debug == 1)
|
|
||||||
// {
|
|
||||||
// Serial.println(F("Master Card Erased from device"));
|
|
||||||
// Serial.println(F("Please reset to re-program Master Card"));
|
|
||||||
// }
|
|
||||||
// while (1)
|
|
||||||
// ;
|
|
||||||
// }
|
|
||||||
// // Serial.println(F("Master Card Erase Cancelled"));
|
|
||||||
// }
|
|
||||||
// if (programMode)
|
|
||||||
// {
|
|
||||||
// cycleLeds(); // Program Mode cycles through Red Green Blue waiting to read a new card
|
|
||||||
// }
|
|
||||||
// else
|
|
||||||
// {
|
|
||||||
// normalModeOn(); // Normal mode, blue Power LED is on, all others are off
|
|
||||||
// }
|
|
||||||
// CheckButton();
|
|
||||||
// } while (!successRead); //the program will not go further while you are not getting a successful read
|
|
||||||
//
|
|
||||||
// if (programMode)
|
|
||||||
// {
|
|
||||||
// if (isMaster(readCard))
|
|
||||||
// { //When in program mode check First If master card scanned again to exit program mode
|
|
||||||
// // Serial.println(F("Master Card Scanned"));
|
|
||||||
// // Serial.println(F("Exiting Program Mode"));
|
|
||||||
// // Serial.println(F("-----------------------------"));
|
|
||||||
// programMode = false;
|
|
||||||
// return;
|
|
||||||
// }
|
|
||||||
// else
|
|
||||||
// {
|
|
||||||
// if (findID(readCard))
|
|
||||||
// { // If scanned card is known delete it
|
|
||||||
// // Serial.println(F("I know this PICC, removing..."));
|
|
||||||
// deleteID(readCard);
|
|
||||||
// // Serial.println("-----------------------------");
|
|
||||||
// // Serial.println(F("Scan a PICC to ADD or REMOVE to EEPROM"));
|
|
||||||
// }
|
|
||||||
// else
|
|
||||||
// { // If scanned card is not known add it
|
|
||||||
// // Serial.println(F("I do not know this PICC, adding..."));
|
|
||||||
// writeID(readCard);
|
|
||||||
// // Serial.println(F("-----------------------------"));
|
|
||||||
// // Serial.println(F("Scan a PICC to ADD or REMOVE to EEPROM"));
|
|
||||||
// }
|
|
||||||
// }
|
|
||||||
// }
|
|
||||||
// else
|
|
||||||
// {
|
|
||||||
// if (isMaster(readCard))
|
|
||||||
// { // If scanned card's ID matches Master Card's ID - enter program mode
|
|
||||||
// programMode = true;
|
|
||||||
// // Serial.println(F("Hello Master - Entered Program Mode"));
|
|
||||||
// uint8_t count = EEPROM.read(0); // Read the first Byte of EEPROM that
|
|
||||||
// // Serial.print(F("I have ")); // stores the number of ID's in EEPROM
|
|
||||||
// // Serial.print(count);
|
|
||||||
// // Serial.print(F(" record(s) on EEPROM"));
|
|
||||||
// // Serial.println("");
|
|
||||||
// // Serial.println(F("Scan a PICC to ADD or REMOVE to EEPROM"));
|
|
||||||
// // Serial.println(F("Scan Master Card again to Exit Program Mode"));
|
|
||||||
// // Serial.println(F("-----------------------------"));
|
|
||||||
// }
|
|
||||||
// else
|
|
||||||
// {
|
|
||||||
// if (findID(readCard))
|
|
||||||
// { // If not, see if the card is in the EEPROM
|
|
||||||
// // Serial.println(F("Welcome, You shall pass"));
|
|
||||||
// relay_stt = true;
|
|
||||||
// granted(4000); // Open the door lock for 300 ms
|
|
||||||
// ClearSerialdata();
|
|
||||||
// }
|
|
||||||
// else
|
|
||||||
// { // If not, show that the ID was not valid
|
|
||||||
// // Serial.println(F("You shall not pass"));
|
|
||||||
// denied();
|
|
||||||
// }
|
|
||||||
// }
|
|
||||||
// }
|
|
||||||
//
|
|
||||||
//}
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
//----------------------------------------
|
|
||||||
// wdt_reset();
|
|
||||||
//}
|
|
||||||
|
|
||||||
///////////////////////////////////////// Access Granted ///////////////////////////////////
|
///////////////////////////////////////// Access Granted ///////////////////////////////////
|
||||||
// Turn on Light camera
|
// Turn on Light camera
|
||||||
|
|
@ -396,9 +131,7 @@ void TurnOff_Light() {
|
||||||
|
|
||||||
void granted(uint16_t setDelay)
|
void granted(uint16_t setDelay)
|
||||||
{
|
{
|
||||||
digitalWrite(blueLed, LED_OFF); // Turn off blue LED
|
|
||||||
digitalWrite(redLed, LED_OFF); // Turn off red LED
|
|
||||||
digitalWrite(greenLed, LED_ON); // Turn on green LED
|
|
||||||
digitalWrite(relay, LOW); // Unlock door!
|
digitalWrite(relay, LOW); // Unlock door!
|
||||||
digitalWrite(ledView, LOW);
|
digitalWrite(ledView, LOW);
|
||||||
delay(setDelay); // Hold door lock open for given seconds
|
delay(setDelay); // Hold door lock open for given seconds
|
||||||
|
|
@ -409,323 +142,22 @@ void granted(uint16_t setDelay)
|
||||||
|
|
||||||
void granted_2(uint16_t setDelay)
|
void granted_2(uint16_t setDelay)
|
||||||
{
|
{
|
||||||
digitalWrite(blueLed, LED_OFF); // Turn off blue LED
|
|
||||||
digitalWrite(redLed, LED_OFF); // Turn off red LED
|
|
||||||
digitalWrite(greenLed, LED_ON); // Turn on green LED
|
|
||||||
digitalWrite(relay_2, LOW); // Unlock door!
|
digitalWrite(relay_2, LOW); // Unlock door!
|
||||||
digitalWrite(ledView, LOW);
|
digitalWrite(ledView, LOW);
|
||||||
// digitalWrite(Light, HIGH);
|
|
||||||
delay(setDelay); // Hold door lock open for given seconds
|
delay(setDelay); // Hold door lock open for given seconds
|
||||||
digitalWrite(relay_2, HIGH); // Relock door
|
digitalWrite(relay_2, HIGH); // Relock door
|
||||||
digitalWrite(ledView, HIGH);
|
digitalWrite(ledView, HIGH);
|
||||||
// digitalWrite(Light, LOW);
|
|
||||||
delay(200); // Hold green LED on for a second
|
delay(200); // Hold green LED on for a second
|
||||||
}
|
}
|
||||||
|
|
||||||
///////////////////////////////////////// Access Denied ///////////////////////////////////
|
|
||||||
void denied()
|
|
||||||
{
|
|
||||||
digitalWrite(greenLed, LED_OFF); // Make sure green LED is off
|
|
||||||
digitalWrite(blueLed, LED_OFF); // Make sure blue LED is off
|
|
||||||
digitalWrite(redLed, LED_ON); // Turn on red LED
|
|
||||||
delay(1000);
|
|
||||||
}
|
|
||||||
|
|
||||||
///////////////////////////////////////// Get PICC's UID ///////////////////////////////////
|
|
||||||
uint8_t getID()
|
|
||||||
{
|
|
||||||
// Getting ready for Reading PICCs
|
|
||||||
if (!mfrc522.PICC_IsNewCardPresent())
|
|
||||||
{ //If a new PICC placed to RFID reader continue
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
if (!mfrc522.PICC_ReadCardSerial())
|
|
||||||
{ //Since a PICC placed get Serial and continue
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
// There are Mifare PICCs which have 4 byte or 7 byte UID care if you use 7 byte PICC
|
|
||||||
// I think we should assume every PICC as they have 4 byte UID
|
|
||||||
// Until we support 7 byte PICCs
|
|
||||||
// Serial.println(F("Scanned PICC's UID:"));
|
|
||||||
for (uint8_t i = 0; i < 4; i++)
|
|
||||||
{ //
|
|
||||||
readCard[i] = mfrc522.uid.uidByte[i];
|
|
||||||
// Serial.print(readCard[i], HEX);
|
|
||||||
}
|
|
||||||
// Serial.println("");
|
|
||||||
mfrc522.PICC_HaltA(); // Stop reading
|
|
||||||
return 1;
|
|
||||||
}
|
|
||||||
int k;
|
|
||||||
void ShowReaderDetails()
|
|
||||||
{
|
|
||||||
// Get the MFRC522 software version
|
|
||||||
byte v = mfrc522.PCD_ReadRegister(mfrc522.VersionReg);
|
|
||||||
// Serial.print(F("MFRC522 Software Version: 0x"));
|
|
||||||
// Serial.print(v, HEX);
|
|
||||||
if (v == 0x91)
|
|
||||||
// Serial.print(F(" = v1.0"));
|
|
||||||
k = 0;
|
|
||||||
else if (v == 0x92)
|
|
||||||
// Serial.print(F(" = v2.0"));
|
|
||||||
k = 1;
|
|
||||||
else
|
|
||||||
// Serial.print(F(" (unknown),probably a chinese clone?"));
|
|
||||||
// Serial.println("");
|
|
||||||
// When 0x00 or 0xFF is returned, communication probably failed
|
|
||||||
if ((v == 0x00) || (v == 0xFF))
|
|
||||||
{
|
|
||||||
// Serial.println(F("WARNING: Communication failure, is the MFRC522 properly connected?"));
|
|
||||||
// Serial.println(F("SYSTEM HALTED: Check connections."));
|
|
||||||
// Visualize system is halted
|
|
||||||
digitalWrite(greenLed, LED_OFF); // Make sure green LED is off
|
|
||||||
digitalWrite(blueLed, LED_OFF); // Make sure blue LED is off
|
|
||||||
digitalWrite(redLed, LED_ON); // Turn on red LED
|
|
||||||
while (true)
|
|
||||||
; // do not go further
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
///////////////////////////////////////// Cycle Leds (Program Mode) ///////////////////////////////////
|
|
||||||
void cycleLeds()
|
|
||||||
{
|
|
||||||
digitalWrite(redLed, LED_OFF); // Make sure red LED is off
|
|
||||||
digitalWrite(greenLed, LED_ON); // Make sure green LED is on
|
|
||||||
digitalWrite(blueLed, LED_OFF); // Make sure blue LED is off
|
|
||||||
delay(200);
|
|
||||||
digitalWrite(redLed, LED_OFF); // Make sure red LED is off
|
|
||||||
digitalWrite(greenLed, LED_OFF); // Make sure green LED is off
|
|
||||||
digitalWrite(blueLed, LED_ON); // Make sure blue LED is on
|
|
||||||
delay(200);
|
|
||||||
digitalWrite(redLed, LED_ON); // Make sure red LED is on
|
|
||||||
digitalWrite(greenLed, LED_OFF); // Make sure green LED is off
|
|
||||||
digitalWrite(blueLed, LED_OFF); // Make sure blue LED is off
|
|
||||||
delay(200);
|
|
||||||
}
|
|
||||||
|
|
||||||
//////////////////////////////////////// Normal Mode Led ///////////////////////////////////
|
|
||||||
void normalModeOn()
|
|
||||||
{
|
|
||||||
digitalWrite(blueLed, LED_ON); // Blue LED ON and ready to read card
|
|
||||||
digitalWrite(redLed, LED_OFF); // Make sure Red LED is off
|
|
||||||
digitalWrite(greenLed, LED_OFF); // Make sure Green LED is off
|
|
||||||
digitalWrite(relay, HIGH); // Make sure Door is Locked
|
|
||||||
digitalWrite(ledView, HIGH);
|
|
||||||
}
|
|
||||||
|
|
||||||
//////////////////////////////////////// Read an ID from EEPROM //////////////////////////////
|
|
||||||
void readID(uint8_t number)
|
|
||||||
{
|
|
||||||
uint8_t start = (number * 4) + 2; // Figure out starting position
|
|
||||||
for (uint8_t i = 0; i < 4; i++)
|
|
||||||
{ // Loop 4 times to get the 4 Bytes
|
|
||||||
storedCard[i] = EEPROM.read(start + i); // Assign values read from EEPROM to array
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
///////////////////////////////////////// Add ID to EEPROM ///////////////////////////////////
|
|
||||||
void writeID(byte a[])
|
|
||||||
{
|
|
||||||
if (!findID(a))
|
|
||||||
{ // Before we write to the EEPROM, check to see if we have seen this card before!
|
|
||||||
uint8_t num = EEPROM.read(0); // Get the numer of used spaces, position 0 stores the number of ID cards
|
|
||||||
uint8_t start = (num * 4) + 6; // Figure out where the next slot starts
|
|
||||||
num++; // Increment the counter by one
|
|
||||||
EEPROM.write(0, num); // Write the new count to the counter
|
|
||||||
for (uint8_t j = 0; j < 4; j++)
|
|
||||||
{ // Loop 4 times
|
|
||||||
EEPROM.write(start + j, a[j]); // Write the array values to EEPROM in the right position
|
|
||||||
}
|
|
||||||
successWrite();
|
|
||||||
// Serial.println(F("Succesfully added ID record to EEPROM"));
|
|
||||||
}
|
|
||||||
else
|
|
||||||
{
|
|
||||||
failedWrite();
|
|
||||||
// Serial.println(F("Failed! There is something wrong with ID or bad EEPROM"));
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
///////////////////////////////////////// Remove ID from EEPROM ///////////////////////////////////
|
|
||||||
void deleteID(byte a[])
|
|
||||||
{
|
|
||||||
if (!findID(a))
|
|
||||||
{ // Before we delete from the EEPROM, check to see if we have this card!
|
|
||||||
failedWrite(); // If not
|
|
||||||
// Serial.println(F("Failed! There is something wrong with ID or bad EEPROM"));
|
|
||||||
}
|
|
||||||
else
|
|
||||||
{
|
|
||||||
uint8_t num = EEPROM.read(0); // Get the numer of used spaces, position 0 stores the number of ID cards
|
|
||||||
uint8_t slot; // Figure out the slot number of the card
|
|
||||||
uint8_t start; // = ( num * 4 ) + 6; // Figure out where the next slot starts
|
|
||||||
uint8_t looping; // The number of times the loop repeats
|
|
||||||
uint8_t j;
|
|
||||||
uint8_t count = EEPROM.read(0); // Read the first Byte of EEPROM that stores number of cards
|
|
||||||
slot = findIDSLOT(a); // Figure out the slot number of the card to delete
|
|
||||||
start = (slot * 4) + 2;
|
|
||||||
looping = ((num - slot) * 4);
|
|
||||||
num--; // Decrement the counter by one
|
|
||||||
EEPROM.write(0, num); // Write the new count to the counter
|
|
||||||
for (j = 0; j < looping; j++)
|
|
||||||
{ // Loop the card shift times
|
|
||||||
EEPROM.write(start + j, EEPROM.read(start + 4 + j)); // Shift the array values to 4 places earlier in the EEPROM
|
|
||||||
}
|
|
||||||
for (uint8_t k = 0; k < 4; k++)
|
|
||||||
{ // Shifting loop
|
|
||||||
EEPROM.write(start + j + k, 0);
|
|
||||||
}
|
|
||||||
successDelete();
|
|
||||||
// Serial.println(F("Succesfully removed ID record from EEPROM"));
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
///////////////////////////////////////// Check Bytes ///////////////////////////////////
|
|
||||||
bool checkTwo(byte a[], byte b[])
|
|
||||||
{
|
|
||||||
for (uint8_t k = 0; k < 4; k++)
|
|
||||||
{ // Loop 4 times
|
|
||||||
if (a[k] != b[k])
|
|
||||||
{ // IF a != b then false, because: one fails, all fail
|
|
||||||
return false;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
return true;
|
|
||||||
}
|
|
||||||
|
|
||||||
///////////////////////////////////////// Find Slot ///////////////////////////////////
|
|
||||||
uint8_t findIDSLOT(byte find[])
|
|
||||||
{
|
|
||||||
uint8_t count = EEPROM.read(0); // Read the first Byte of EEPROM that
|
|
||||||
for (uint8_t i = 1; i <= count; i++)
|
|
||||||
{ // Loop once for each EEPROM entry
|
|
||||||
readID(i); // Read an ID from EEPROM, it is stored in storedCard[4]
|
|
||||||
if (checkTwo(find, storedCard))
|
|
||||||
{ // Check to see if the storedCard read from EEPROM
|
|
||||||
// is the same as the find[] ID card passed
|
|
||||||
return i; // The slot number of the card
|
|
||||||
}
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
///////////////////////////////////////// Find ID From EEPROM ///////////////////////////////////
|
|
||||||
bool findID(byte find[])
|
|
||||||
{
|
|
||||||
uint8_t count = EEPROM.read(0); // Read the first Byte of EEPROM that
|
|
||||||
for (uint8_t i = 1; i < count; i++)
|
|
||||||
{ // Loop once for each EEPROM entry
|
|
||||||
readID(i); // Read an ID from EEPROM, it is stored in storedCard[4]
|
|
||||||
if (checkTwo(find, storedCard))
|
|
||||||
{ // Check to see if the storedCard read from EEPROM
|
|
||||||
return true;
|
|
||||||
}
|
|
||||||
else
|
|
||||||
{ // If not, return false
|
|
||||||
}
|
|
||||||
}
|
|
||||||
return false;
|
|
||||||
}
|
|
||||||
|
|
||||||
///////////////////////////////////////// Write Success to EEPROM ///////////////////////////////////
|
|
||||||
// Flashes the green LED 3 times to indicate a successful write to EEPROM
|
|
||||||
void successWrite()
|
|
||||||
{
|
|
||||||
digitalWrite(blueLed, LED_OFF); // Make sure blue LED is off
|
|
||||||
digitalWrite(redLed, LED_OFF); // Make sure red LED is off
|
|
||||||
digitalWrite(greenLed, LED_OFF); // Make sure green LED is on
|
|
||||||
delay(200);
|
|
||||||
digitalWrite(greenLed, LED_ON); // Make sure green LED is on
|
|
||||||
delay(200);
|
|
||||||
digitalWrite(greenLed, LED_OFF); // Make sure green LED is off
|
|
||||||
delay(200);
|
|
||||||
digitalWrite(greenLed, LED_ON); // Make sure green LED is on
|
|
||||||
delay(200);
|
|
||||||
digitalWrite(greenLed, LED_OFF); // Make sure green LED is off
|
|
||||||
delay(200);
|
|
||||||
digitalWrite(greenLed, LED_ON); // Make sure green LED is on
|
|
||||||
delay(200);
|
|
||||||
}
|
|
||||||
|
|
||||||
///////////////////////////////////////// Write Failed to EEPROM ///////////////////////////////////
|
|
||||||
// Flashes the red LED 3 times to indicate a failed write to EEPROM
|
|
||||||
void failedWrite()
|
|
||||||
{
|
|
||||||
digitalWrite(blueLed, LED_OFF); // Make sure blue LED is off
|
|
||||||
digitalWrite(redLed, LED_OFF); // Make sure red LED is off
|
|
||||||
digitalWrite(greenLed, LED_OFF); // Make sure green LED is off
|
|
||||||
delay(200);
|
|
||||||
digitalWrite(redLed, LED_ON); // Make sure red LED is on
|
|
||||||
delay(200);
|
|
||||||
digitalWrite(redLed, LED_OFF); // Make sure red LED is off
|
|
||||||
delay(200);
|
|
||||||
digitalWrite(redLed, LED_ON); // Make sure red LED is on
|
|
||||||
delay(200);
|
|
||||||
digitalWrite(redLed, LED_OFF); // Make sure red LED is off
|
|
||||||
delay(200);
|
|
||||||
digitalWrite(redLed, LED_ON); // Make sure red LED is on
|
|
||||||
delay(200);
|
|
||||||
}
|
|
||||||
|
|
||||||
///////////////////////////////////////// Success Remove UID From EEPROM ///////////////////////////////////
|
|
||||||
// Flashes the blue LED 3 times to indicate a success delete to EEPROM
|
|
||||||
void successDelete()
|
|
||||||
{
|
|
||||||
digitalWrite(blueLed, LED_OFF); // Make sure blue LED is off
|
|
||||||
digitalWrite(redLed, LED_OFF); // Make sure red LED is off
|
|
||||||
digitalWrite(greenLed, LED_OFF); // Make sure green LED is off
|
|
||||||
delay(200);
|
|
||||||
digitalWrite(blueLed, LED_ON); // Make sure blue LED is on
|
|
||||||
delay(200);
|
|
||||||
digitalWrite(blueLed, LED_OFF); // Make sure blue LED is off
|
|
||||||
delay(200);
|
|
||||||
digitalWrite(blueLed, LED_ON); // Make sure blue LED is on
|
|
||||||
delay(200);
|
|
||||||
digitalWrite(blueLed, LED_OFF); // Make sure blue LED is off
|
|
||||||
delay(200);
|
|
||||||
digitalWrite(blueLed, LED_ON); // Make sure blue LED is on
|
|
||||||
delay(200);
|
|
||||||
}
|
|
||||||
|
|
||||||
////////////////////// Check readCard IF is masterCard ///////////////////////////////////
|
|
||||||
// Check to see if the ID passed is the master programing card
|
|
||||||
bool isMaster(byte test[])
|
|
||||||
{
|
|
||||||
return checkTwo(test, masterCard);
|
|
||||||
}
|
|
||||||
|
|
||||||
bool monitorWipeButton(uint32_t interval)
|
|
||||||
{
|
|
||||||
uint32_t now = (uint32_t)millis();
|
|
||||||
while ((uint32_t)millis() - now < interval)
|
|
||||||
{
|
|
||||||
// check on every half a second
|
|
||||||
if (((uint32_t)millis() % 500) == 0)
|
|
||||||
{
|
|
||||||
if (digitalRead(wipeB) != LOW)
|
|
||||||
return false;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
return true;
|
|
||||||
}
|
|
||||||
// ADD Code
|
// ADD Code
|
||||||
|
|
||||||
int stt;
|
|
||||||
int stt_old;
|
|
||||||
String input;
|
|
||||||
|
|
||||||
|
|
||||||
int stt_2;
|
|
||||||
int stt_old_2;
|
|
||||||
String input_2;
|
|
||||||
|
|
||||||
|
|
||||||
void ReadButton()
|
void ReadButton()
|
||||||
{
|
{
|
||||||
stt = digitalRead(button);
|
stt = digitalRead(button);
|
||||||
stt_2 = digitalRead(button_2);
|
stt_2 = digitalRead(button_2);
|
||||||
// Serial.print(stt);
|
|
||||||
// Serial.print("\t");
|
|
||||||
// Serial.println(stt_2);
|
|
||||||
if (stt == 0 && stt_old == 1)
|
if (stt == 0 && stt_old == 1)
|
||||||
{
|
{
|
||||||
relay_stt = true;
|
relay_stt = true;
|
||||||
|
|
|
||||||
Loading…
Reference in New Issue
Block a user